Users Guide

Dell PowerConnect W AirWave 7.1 | User Guide Creating and Using Templates | 191
%endif%
%if radio_type=11bg%
radio %radio_index% speed basic1 basic2 basic5p5 6 9 basic11 12 18 24 36 48 54
radio %radio_index% on-channel-scan
radio %radio_index% adoption-pref-id 7
radio %radio_index% enhanced-beacon-table
radio %radio_index% enhanced-probe-table
%endif%
%if radio_type=11bgn%
radio %radio_index% speed basic11b2 6 9 12 18 24 36 48 54 mcs
0,1
,2,3,4,5,6,7,8,9,10,11,12,13,14,15
%endif%
radio %radio_index% channel-power indoor %channel% %transmit_power%
%ch
annel_attribute%
%detector%
%adoption_pref_id%
radio %radio_index% enhanced-beacon-table
radio %radio_index% on-channel-scan
%ap_include_4%
Configuring a Global Template
Global templates allow AWMS users to define a single template in a global group that can be used to manage
access points in subscriber groups. Such a template enables turning settings like group RADIUS servers and
encryption keys into variables that can be configured on a per-group basis.
Perform the following steps to create a
global template, or to view or edit an existing global template:
1. Navigate to the Group
> Templates configuration page for the global group that owns it.
2. Click the Add button to add a new t
emplate, or click the pencil icon next to an existing template to edit that
template.
3. Examine the configurations illustrated in Figure 125.
Figure 125 Group
> Templates > Add Page Illustration
4. Use the drop-down menu to select a device from which to build the global
template and click the Fetch
button. The drop-down menus are populated with all devices that are contained in any group that subscribes
to the global group. The fetched configuration populates the template field. Global template variables can be
configured with the Add button in the Template Variables box, illustrated in Figure 126.