Users Guide

Dell PowerConnect W AirWave 7.1 | User Guide Using RAPIDS and Rogue Classification | 207
To create a new rule, select the Add button next to New RAPIDS Classification Rule to launch the RAPIDS
Classification Rule page (see Figure 136).
Figure 136 C
lassification Rule Page
Fill in the settings described in Table 105 then select an option from the drop down menu.
Table 106, Table 107, and Table 108 define the drop down menu options that
are at the bottom left of the
RAPIDS Classification Ru
le dialog box (see Figure 136). Once all rule settings are defined, click the Add button.
The new rule automatically appears in the RA
PIDS > Rules page.
Reorder Drag and Drop Icon Changes the sequence of rules in relation to each other. Click, then drag and drop, the icon for
any rule to move it up or down in relation to other rules. A revised sequence of rules must be
saved before rogues are classified in the revised sequence.
NOTE: The seq
uence of rules is very important to proper rogue classification. A device gets
classified by the first rule to which it complies, even if it conforms to additional rules later in the
sequence.
Table 106 Wireless Properties Drop Down Menu
Option Description
Detected on WLAN Classifies based on how the rogue is detected on the wireless LAN.
Discovering AP Count Classifies based on the number of managed devices that can hear th
e rogue. Enter a numeric
value and select At Least or At Most.
Encryption Classifies based on the rogue matching a specified encryption method.
Table 105 RAPIDS > Rules Page
Field Description