Users Guide

Dell PowerConnect W AirWave 7.1 | User Guide Performing Daily Administration in AWMS | 223
After completing steps 1-3 in “Creating New Triggers” on page214, perform the following steps to complete
the configuration of RAD
IUS-related triggers.
a. If you have not already done so, choose a trigger type from the RADIUS... list in the drop-down Type
menu. S
ee Figure 142. Table 116 itemizes and describes the condition
settings for each RADIUS
Authentication trigger type.
Figure 151 RADIUS Auth
entication Trigger Condition Settings
b. Delete conditions for any trigger as desired by clic
king the trash can icon to the right of the condition to
be removed.
c. Click Save. The trigger appears on your
next viewing of the System > Triggers page with all other active
triggers.
d. You can edit or delete any trigger as desired from the S
ystem > Triggers page.
 To edit an existing trigger, click the pencil icon next to the respective trigger and edit settings in the
Trigger Detail page described in Table 112.
 To delete a trigger, check the box next to the trigger to remove, and click Delete.
e. Repeat this procedure for as many triggers and conditions
as desired. Refer to the start of “Creating New
Triggers” on page214 to create a new trigger.
Setting Triggers for IDS Events
After completing steps 1-3 in “Creating New Triggers” on page214, perform the following steps to complete
the configuration of Intrusion Detection Syste
m (IDS)-related triggers.
a. If you have not already done so, choose the Device IDS Events trigger type from the drop-down Type
menu. S
ee Figure 142. Table 117 describes condition settings for this trigger type.
Table 116 RADIUS Authentication Trigger Types and Condition Settings
RADIUS Trigger
Options
Description
User RADIUS
Authentication Issues
This trigger type sets the threshold for the maximum number of failures before an alert is issued for a
user. Click Add New Trigger Condition to specify the count characteristics that trigger an alert. The
Option, Condition, and Value fields allow you to define the numeric value of user issues.
Device RADIUS
Auth
entication Issues
This trigger type sets the threshold for the maximum number of failures before an alert is issued for a
device. The Option, Condition, and Value fields allow you to define the numeric value of device
issues.
Total RADIUS
Auth
entication Issues
This trigger sets the threshold for the maximum number of failures before an alert is issued for both
users and devices. The Option, Condition, and Value fields allow you to define the numeric value of
device and user issues combined.