Users Guide

232 | Performing Daily Administration in AWMS Dell PowerConnect W AirWave 7.1 | User Guide
Figure 160 Users > Guest Users Page Illustration
Guest users associated to the wireless
network appear on the same list as other wireless users, but are
identified as guest users in the SSID column, when this column is present for Cisco WLC. The User Detail
page for a guest user also contains a box with the same guest information that appears for each user on the
Users > Guest Users list.
5. To add a new guest user, click Add, and complete the req
uired and optional fields in the User Detail page,
illustrated in Figure 161. Table 121 describes most fields. The first three fields are required, and the
remaining fields are optional.
Table 121 Us
ers > Guest Users Fields
Field Description
Repair Guest User
Errors button
Sets AWMS to attempt to push the guest user again in an attempt to repair any errors in the Status
column.
Add New Guest Users
butto
n
Adds a new guest user to a controller via AWMS.
Username Randomly generates a user name for privacy protection. This name appears on the Guest User detail
page.
Enabled Enables or disables the user status. Set the status of the guest user as active (enabled) or expired
(disabled). Configure the user on the Guest User edit page by clicking the pencil icon.
Email Displays the optional email address of the user. Set the
email address with the Guest User edit page by
clicking the pencil icon.
Company Name Displays the optional company name for the user. Set the company name with the Guest User edit page
by clicking the pencil icon.
Sponsor Name Displays the name of the sponsor for the guest user. This setting is optional. Set the sponsor with the
Guest User edit page by clicking the pencil icon.
Expiration Displays the date the guest user's access is to expire. Set the expir
ation with the Guest User edit page
by clicking the pencil icon.
Profile/SSID Sets the SSID that the guest user can access. This setting applies to Cisco WLC
only. Set the SSID with
the Guest User edit page by clicking the pencil icon.
Status Reports current status by the controller. If error messages appear in this column, select the user with
the checkbox at left, and click the Repair guest user errors button.
Print button (for
checke
d users)
Sends the selected guest user's information to an external printer.
Delete button (for
checke
d users)
Removes the selected guest user from AWMS and from the controller.