Users Guide

Dell PowerConnect W AirWave 7.1 | User Guide Installing AWMS | 25
Activity Section
The Activity section displays all detailed configuration and monitoring information, and is where changes are
implemented.
Reports The Reports pages list all the standard and custom reports generated by
AWMS. AWMS supports 13 reports in the AWMS module. For additional
information, refer to Chapter 9, “Creating, Running, and Emailing Reports”
on page26
1.
 Generated
 Definition
 Focused Sub-Menus
 Details
System The Sy
stem page provides information about AWMS operation and
administration, including overall system status, the job scheduler, trigger/
alert administration, and so forth. For additional information, refer to
“Monitoring and Supporting AWMS with
the System Pages” on
page24
9.
 Status
 Event Log
 Triggers
 Alerts
 Configuration Change Jobs
 Firmware Upgrade Jobs
 Performance
Device Setup The Device Setup p
ages provide the ability to add, configure, and monitor
devices, to include setting AP discovery parameters, performing firmware
management, defining VLANs, and so forth. For additional information,
refer to “Enabling AWMS to Manage Your Devices” on page52.
 Discover
 Add
 Communication
 Aruba Configuration
 Upload Files
AMP Setup The AM
P Setup pages provide all information relating to the configuration
of AWMS itself and its connection to your network. This page entails
several processes, configurations, or tools in AWMS. For additional
information, start with Chapter 3, “Configuring AWMS” on page31.
NOTE: The AMP Setup pages
may not be visible, depending on the role
and license set in AWMS.
 General
 Network
 Users
 Roles
 Authentication
 WLSE
 ACS
 NMS
 RADIUS Accounting
 PCI Compliance
RAPIDS The RAPIDS pages
provide all information relating to rogue access
points, including methods of discovery and lists of discovered and
possible rogues. For additional information, refer to Chapter 7, “Using
RAPIDS and Rogue Classification” on page19
5.
NOTE: The RAPIDS pages may not be visib
le, depending on the role and
license set in AWMS.
 Overview
 Rogue APs
 Setup
 Rules
 Score Override
 Audit Log
VisualRF VisualRF
pages provide graphical access to floor plans, client location,
and RF visualization for floors, buildings, and campuses that host your
network. For additional information, refer to the VisualRF User Guide.
NOTE: V
isualRF may not be visible, depending on the role and license set
in AWMS.
 Overview
 Floor Plans
 Campus/Building
 Setup
 Import
Table 6 Components and Sub-Menus of the AWMS Navigation Screen (Continued)
Main Tab Description Sub-Menus
Note: The AMP Setup tab varies with user role. The RAPIDS and VisualRF tabs appear based on the license entered on the Home
> License page, and might not be visible on your AWMS view.