Users Guide

Dell PowerConnect W AirWave 7.1 | User Guide Creating, Running, and Emailing Reports | 269
 Most Utilized by Maximum Number of Users—By default, this list displays the 10 devices that support the
highest numbers of users. This list provides links to additional information or configuration pages for each
device to make adjustments, as desired.
 Most Utilized by Bandwidth—By default, this list displays the 10 devices that consistently have the highest
bandwidth consumption during the time period defined for the report. This list provides links to additional
information or configuration pages for each device.
 Least Utilized by Maximum Number of Simultaneous Users—By default, this list displays the 10 devices that
are the least used, according to the number of users.
 Least Utilized by Bandwidth—By default, this list displays the 10 devices that are the least used, according to
the bandwidth throughput.
 Devices—This list displays all devices in AWMS. By default is sorted alphabetically by device name.
Any section of this report can be
sorted by any of the columns:
 Rank
 AP/Device
 Number of Users
 Max Simultaneous Users
 Total Bandwidth (MB)
 Average Bandwidth (kbps)
 Location
 Controller
 Folder
 Group
For example, you can specify a location and then sort the Devic
es list by the Location column to see details by
location, or you can see all of the APs associated with a particular controller by sorting on the controller column.
If the AP name contains information about the location of the AP, you can sort by AP name.
If sorting the De
vices list does not provide you with sufficient detail, you can specify a Group or Folder in the
report Definition of a custom report. If you create a separate Group or Folder for each set of master and local
controllers, you can generate a separate report for each Group or Folder. With this method, the summary sections
of each report contain only devices from that Group or Folder.
Perform these steps to view the most recent version of this
report, and to adjust configurations for over-used or
under-used devices.
1. Navigate to the R
eports > Generated page.
2. Scroll to the bottom, and click Dev
ice Summary Report to display Detail device information. You can use this
report as the central starting point to reconfigure over-used or under-used devices.
3. To generate more reports that cover a greater span of
time, refer to “Viewing Generated Reports” on
page264.
Figure 187 and Table 137 illustrate and describe the Repo
rts > Generated > Device Summary Detail page.
Note: You can specify the number of devices that appear in each of the first four categories in the Reports > Definitions > Add
page.