Users Guide
Dell PowerConnect W AirWave 7.1 | User Guide Creating, Running, and Emailing Reports | 281
Figure 195 Reports > Generated > New Users Report Illustration
Using the PCI Compliance Report
AWMS supports PCI requirements in accordance with the Payment Card Industry (PCI) Data Security Standard
(DSS). The PCI Compliance Report displays current PCI configurations and status as enabled on the network.
In addition to citing simple pass or fail st
atus with regard to each PCI requirement, AWMS introduces very
detailed diagnostic information to recommend the specific action or actions required to achieve Pass status, when
sufficient information is available.
Refer to the “Auditing PCI Compliance on the Network” on page74 for information about enabling PCI on the
network. The configurations in that secti
on enable or disable the contents of the PCI Compliance Report that is
viewable on the Reports > Generated page.
Perform these steps to view the most
recent version of the PCI Compliance Report.
1. Verify that AWMS is enabled to monitor compliance with
PCI requirements, as described in the “Enabling or
Disabling PCI Auditing” on page76.
2. Navigate to the R
eports > Generated page.
3. Scroll to the bottom, and click PC
I Compliance to display Detail information.
Figure 196 illustrates the fields and information in the most recent PCI Co
mpliance Report.
Table 141 Reports > Generated > New Users Report Fields
Field Description
Username Displays the username when known.
Role Displays the role with which the user is associated.
MAC Address Displays the MAC address of the AP device by which the user connected.
Vendor Displays vendor information for the AP device by
which the user connected.
AP/Device Displays the device type by which the user connected.
Association Time Displays the time in which the AP device associated with the controller.
Duration Displays the duration of the user’s connection.