Users Guide

Dell PowerConnect W AirWave 7.1 | User Guide Third-Party Security Integration for AWMS | 305
Appendix B
Third-Party Security Integration for
AWMS
This appendix describes the optional integration of third party security products for AWMS, as follows:
 “Bluesocket Integration” on page305
 “ReefEdge Integration” on page305
 “HP ProCurve 700wl Series Secure Access Controllers Integration” on page306
Bluesocket Integration
A Bluesocket security scheme for AWMS has the following prerequisites:
 Bluesocket version 2.1 or higher
 AWMS version 1.8 or higher
 Completion of AMP Setup > RADIUS Accounting page
Bluesocket Configuration
Perform these steps to configure a Bluesock security scheme:
1. Log in into the Bluesocket Server via HTTP with proper
user credentials.
2. Navigate to the U
sers > External Accounting Servers page.
3. Select Ext
ernal RADIUS Accounting from the Create drop-down list.
4. Click Enab
le server onscreen.
5. Enter the user-definable Na
me for the AWMS server.
6. Enter the Server IP
Address or DNS entry for AWMS.
7. Accept the default Port setting of 1813.
8. Enter the Shared
Secret (matching the AWMS shared secret).
9. Enter Notes (optional).
10. Click the Save button.
11. If you are you using an External LDAP Server, ensure that the accounting
records are forwarding to AWMS
upon authentication.
12. Navigate to U
sers > External Authentication Servers.
13. Modify the LDAP server.
14. Ensure under the Accounting server matches the server
entered in step 5.
15. Click the Save button.
16. To verify and view the log files on the Bluesocket server, proceed to Status > Log.
17. To verify and view the log files on A
WMS, proceed to SYSTEM > Event Log.
ReefEdge Integration
A ReefEdge security scheme for AWMS has the following prerequisites:
 ReefEdge version 3.0.3 or higher