Users Guide

Dell PowerConnect W AirWave 7.1 | User Guide Cisco Clean Access Integration (Perfigo) | 317
Appendix E
Cisco Clean Access Integration
(Perfigo)
This appendix includes the following sections:
 “Prerequisites for Integrating AWMS with Cisco Clean Access” on page317
 “Adding AWMS as RADIUS Accounting Server” on page317
 “Configuring Data in Accounting Packets” on page317
Prerequisites for Integrating AWMS with Cisco Clean Access
 Run Clean Access Software 3.5 or higher
 Run AWMS version 3.4.0 or higher
 Complete of the AMP SETUP > RADIUS Accounting section on AMP
Adding AWMS as RADIUS Accounting Server
Perform these steps to configure Cisco Clean Access integration:
1. Log in to the clean machine server and navigate to the User
Management > Accounting > Server Config
page.
 Select Enable RADIUS Accounting.
 Input the AWMS Hostname or IP Address.
 For Timeout (sec) - leave default 30.
 Ensure the Server Port is set for 1813.
 Ensure that the input Shared Secret matches the AWMS shared secret.
2. Select Up
date button to save.
Configuring Data in Accounting Packets
1. Navigate to User Management > Accounting > Shared Events.
2. Map the following attributes to corresponding da
ta elements as seen in the graphic:
Framed_IP_Address = "User IP"
User_Name = "LocalUser"
Calling_Station_ID = "User MAC"
Note: These attribute element pairs are mandatory for username display within AWMS.