Users Guide

64 | Configuring AWMS Dell PowerConnect W AirWave 7.1 | User Guide
Configuring RADIUS Authentication and Authorization
For RADIUS capability, you must configure the IP/Hostname of the RADIUS server, the TCP port, and the
server shared secret. Perform these steps to configuration RADIUS authentication:
1. Navigate to the AMP Setup > Aut
hentication page. This page displays current status of RADIUS. Figure 30
illustrates this page when neither TACACS+ nor RADIUS
authentication is enabled in AWMS.
Figure 30
AMP Setup > Authentication Page Illustration
2. Click No to
disable or Yes to enable TACACS+ nor RADIUS authentication. If you click Yes, several new
fields appear. Complete the fields described in Table 30.
3. Click Save to retain th
ese configurations, and continue with additional steps in the next procedure.
Table 30 AMP Setu
p > Authentication Fields and Default Values
Field Default Description
Primary Server
Hostname/IP Address
N/A Enter the IP address or the hostname of the primary RADIUS server.
Primary Server Port 49 Enter the TCP port for the primary RADIUS server.
Primary Server Secret N/A Specify the primary shared secret for the primary RADIUS se
rver, and confirm in
the Confirm field.
Secondary Server
Hostname/IP Address
N/A Enter the IP address or the hostname of the secondary
RADIUS server.
Secondary Server Port 49 Enter the TCP port for the secondary RADIUS server.
Secondary Server Secret N/A Enter the shared secret for the secondary RADIUS server.