Users Guide

Dell PowerConnect W AirWave 7.1 | User Guide Configuring and Using Device Groups in AWMS | 93
3. Click Save to retain these Security configurations for the group, click Save and Apply to retain and push these
configurations, or click Revert to return to the last saved security settings for this group.
4. Continue with additional security-r
elated procedures in this document for additional TACACS+, RADIUS,
and SSID settings for device groups, as required.
Authentication Profile
Name
Accounting For Proxim devices only, this field sets the name of the accounting profile to be
supported in this device group.
Authentication Profile
Index
3 For Proxim devices only, this field sets the name of the accounting profile index to
be supported in this device group.
MAC Address Authentication Section
MAC Address
Authentication
No If enabled, only MAC addresses known to the RADIUS server are permitted to
asso
ciate to APs in the Group.
MAC Address Format Single Dash Allows selection of the format for MAC addresses used in RADIUS authentication
and accounting requests:
 Dash Delimited: xx-xx-xx-xx-xx-xx (default)
 Colon Delimited: xx:xx:xx:xx:xx:xx
 Single-Dash: xxxxxx-xxxxxx
 No Delimiter: xxxxxxxxxxxx
This option is supported only for Proxim AP-600, AP-700, AP-2000
, AP-4000, Avaya
AP3/4/5/6/7/8, HP ProCurve 520WL, ProCurve 420 v2.1.0 and higher.
Authorization Lifetime 1800 Sets the amount of time a user can be connected before reauthorization is required.
The supported range is from 900 to 43,200 seconds.
Primary RADIUS Server
Reattempt Period
0 Specifies the time (in minutes) that the AP awaits responses from the primary
RADIUS server before communicating with the secondary RADIUS server, and so
forth
Table 53 Groups > Security Page Fields and Default Values (Continued)
Setting Default Description