Administrator Guide

212 | Onboard Dell Networking W-ClearPass Guest 6.6 | User Guide
Field Description
Account User account for authenticating the connection. If this field is left blank, the user will be
prompted to enter the account information.
User
Authentication
Authentication type for the L2TP or PPTP connection. Options include:
l Password
l RSA SecurID
Password
Prompt
Specifies whether the password for the IPsec connection must be entered every time. Options
include:
l Save and reuse the pasword — greater convenience
l Always ask for the password — greater security
Table 78: VPN Settings Form, Settings Area for L2TP, PPTP, or IPsec(Continued)
Figure 142 The VPN Settings Form, Proxy Settings Area
Field Description
Proxy Setup Specifies the proxy server to use when the VPN connection is active. Options include:
l None — No proxy server will be configured with this VPN profile.
l Manual — A proxy server will be configured with this VPN profile. Specify the proxy server
settings in the Server and Port field.
l Automatic — The proxy server will be automatically configured with this VPN profile. Specify
the location of a proxy auto-config file in the Proxy Server URL field.
Proxy Server
URL
If Automatic was selected in the Proxy Setup field, enter the URLused to retrieve the proxy
settings.
Server and
Port
If Manual was selected in the Proxy Setup field, enter the hostname or IPaddress and the port
number of the proxy the device should connect to. The hostname will only be accepted if the
corresponding IPaddress can be resolved.
Authentication If authentication is required to access this proxy, enter the proxy username.
Password If authentication is required to access this proxy, enter the proxy password. The minimum
password length is six characters.
Confirm
Table 79: VPN Settings Form, Proxy Settings Area