Administrator Guide

238 | Onboard Dell Networking W-ClearPass Guest 6.6 | User Guide
Network Login Access Area
Figure 157 The Provisioning Settings Form, Web Login Tab, Network Login Access Area
Field Description
Allowed
Access
Enter the IP addresses and networks from which logins will be allowed. (IPv4 and IPv6 are both
supported)
Denied
Access
Enter the IP addresses and networks from which logins will be denied. (IPv4 and IPv6 are both
supported)
Deny
Behavior
(Required) Specifies the response shown to the user if their login request is denied. Options
include:
l Send HTTP 404 Not Found status
l Show Access Denied page
l Show a blank page.
Table 96: Provisioning Settings Form, Web Login Tab, Network Login Access Area
Click Next to proceed to the next tab, or Save Changes to complete your edits.
To return to the list of links to all Provisioning Settings tabs, see "About Configuring Provisioning Settings " on
page 221.
Configuring Provisioning Settings for Instructions and Messages
To configure the text for labels and messages shown before, during, and after provisioning, including messages
specific to each operating system, go to Onboard >Deployment and Provisioning, expand the provisioning
setting's row in the list, and click its Edit link. In the Device Provisioning Settings form, click the
Instructions & Messages tab.
To add the fields for a device’s operating system to the Provisioning Settings >Instructions &Messages tab, you
must first enable provisioning for that operating system on the Supported Devices tab.
This section describes the following areas on the Onboard >Deployment and Provisioning > Provisioning
Settings >Instructions &Messages tab:
l "Provisioning Instructions Area" on page 239
l "Device Status Area" on page 241