Administrator Guide

Field Description
Exclusions Role names, AP group names, or AP names that should not be displayed in the AirGroup
user interface. Enter each item on a separate line. Entries are not case-sensitive. To add a
comment, enter it on a separate line that begins with the "#" character.
Polling If selected, schedules automatic polling of AirGroup controller configuration. The form
expands to include scheduling options.
Schedule Choose one of the following options from the drop-down list and complete the scheduling
details:
l None -- Run task at once: In the Run At field, use the calendar picker to specify the
month, day, and time to poll for configuration.
l Hourly: In the Minute field, enter the number of minutes past the hour to poll for
configuration, or 00 to poll on the hour. If you do not need to poll every hour, you can use
the check boxes in the Hours field to specify which hours of the day the poll should run.
l Daily: Use the text boxes in the Time of Day field to enter the hour and minute of the
day the poll should run.
l Weekly: Use the check boxes in the Weekdays field to specify the day or days of the
week the poll should run, then use the text boxes in the Time of Day field to enter the
hour and minute of the day the poll should run.
l Monthly: Use the check boxes in the Months field to specify which month or months the
poll should run, then use the text boxes in the Days field to specify the day or days of the
month. Use the text boxes in the Time of Day field to enter the hour and minute of the
day the poll should run.
l Yearly: In the Run On field, use the drop-down list to select a month, then enter the day
and time in the text boxes.
When a poll is run, you may click Show Details in the Controllers list to view the updated
configuration. For more information, see "AirGroup Controllers" on page 537. Automatic
polling is run only on the publisher node.
Group Names Enter names of shared groups that should be available in the Shared Groups field for
users to choose from when they share a device. If additional user groups are also entered
by users when they share a device, the list in the configuration is automatically updated to
capture these fields. Removing a group name from this list does not remove it from other
shared group lists.
When you type a name for the group in the Group Names field, press the Enter key, and
click Save, the group is created in the system and appears as a "tag". For more information,
see "About AirGroup Time-Based Sharing" on page 89.
Each group name may not exceed 64 characters. A maximum of 32 group names may be
entered. The maximum character limit for the list is 320 characters (including comma
separators).
Network Interface Specifies the interface AirGroup will use to send outbound notification messages. To enable
using a virtual IP address, select the appropriate interface. Options include:
l Automatic — Automatically chooses the appropriate source IPaddress; either the
management port or the data port, depending on the controller's IP address.
l Management port [MGMT] — Always uses the management port as the source
address.
l Data/External port [DATA] — Always uses the data port as the source address.
Table 243: Configure AirGroup Services
Dell Networking W-ClearPass Guest 6.6 | User Guide Administration | 541