Users Guide

The Services page appears. The Services page provides options to add, modify, and remove a service.
2. To add the service, click Add.
The Add Services dialog appears.
3. From the Type drop-down list, select Event-based Enforcement (see Figure 65).
Figure 65: Specifying Event -Based Enforcement
4. Enter the name or label of the event-based enforcement service.
5. Enter the values for any other parameters, including service rules, required for this service.
For a description of all the parameters in the Service page, see Adding Services on page 1.
Associating the Service with an Enforcement Policy
After you create the event-based enforcement service, you must associate the service with an enforcement
policy. You can do this from the Services >Add > Enforcement page.
1. When finished with the parameter settings on the Add Services > Service page, click Next.
The Services > Enforcement page appears.
Figure 66: Selecting the Ingress Events Enforcement Policy
From the Services > Add > Enforcement page, you can either select an existing enforcement policy or
create a new one.
2. From the Enforcement Policy drop-down list, select the appropriate Event Enforcement policy.
3. If you have not configured Event-type Enforcement policies, click Add New Enforcement Policy to create
a new enforcement policy.
4. Specify the values for the remaining parameters as described in Table 40, then click Save.
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Services | 103