Users Guide

108 | Services Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
l Mac OS X
l Windows 10
l Windows 8
l Windows 7
l Windows Vista
l Windows XP
l Windows Server 2008
l Windows Server 2008 R2
l Windows Server 2003
l Windows Server 2003 R2
An internal service rule—Connection:Protocol EQUALS WebAuth—categorizes requests into this type of
service. You can add additional rules if needed.
In addition, you can select a Web-based Authentication service based on the operating system (OS) name. You
can specify or exclude specific OS versions (for details, see the next section, Selecting a Web-Based
Authentication Service by the OS Name).
For service configuration details, see Adding and Removing Services on page 41.
To configure a web-based authentication service:
1. Navigate to Configuration > Services.
The Services page opens.
2. Select the Add link.
The Add Services page opens.
3. From the Type drop-down list, select Web-Based Authentication.
The following service configuration dialog opens:
Figure 69: Web-Based Authentication Service Configuration Dialog
The Audit End-hosts and Profile Endpoints options are not available for a Web-based Authentication service.
Selecting a Web-Based Authentication Service by the OS Name
The Service Rule > Host:OSName attribute allows you to select a Web-based Authentication service based on
the OS name. You can specify or exclude specific OS versions.
To select a web-based authentication service by the OS name and version: