Users Guide

Attribute Name
to create services for a specific OS.
For example, you can use this attribute to differentiate between
Windows 8 and Windows 8.1
OSNameVersion
Provides the Windows OSname and the build version. This attribute
can be used to create different Posture policies for different Windows
10 versions such as 2015 LTSB or 2016 LTSB.
OSType
Specifies the Operating System type. The supported values are:
l Linux
l Mac OS X
l Windows XP
l Windows 7
l Windows 8
l Window 10
l Windows Server 2003
l Windows Server 2003 R2
l Windows Server 2008
l Windows Server 2008 R2
SDKType
Specifies the SDK type.
For example, you can specify that the SDKtype equals V4. For related
information, see Upgrading From OnGuard Plugin Version 1.0 to 2.0
on page 740.
SDKVersion
Specifies the SDK version.
ServerCertificateCheck
This attribute's value shows the status of the W-ClearPass Server
Certificate Check performed by OnGuard agent while sending a
WebAuth request to the W-ClearPass server.This attribute can also be
used in a Service Classification.
The value of this attribute can be one of the following:
l Passed: OnGuard Agent successfully verified the W-ClearPass
Server Certificate.
l Failed: OnGuard Agent failed to verify the W-ClearPass Server
Certificate.
UserAgent
The value of this attribute contains both Agent Type and Agent
Version. For example, OnGuard 6.6.5.89660.
Table 43: Service Rule > Web-Based Authentication Host Attributes (Continued)
Web-based Health Check Only Service
This type of service is the same as the Web-based Authentication service except that there is no
authentication performed; only health check are performed.
l The internal service rule Connection:Protocol EQUALS WebAuth categorizes requests into this type of
service.
l The external service rule Host:CheckType EQUALS Health is automatically added when you select this
type of service.
For more information, see Web-Based Authentication Service on page 107.
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Services | 111