Users Guide

128 | Monitoring Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Field Action/Description
Username Indicates the name of the admin user.
Session ID Displays the automatically-generated session ID for the selected TACACS+ session.
Time Indicates the time that the TACACS+ session was initiated.
Status Indicates the authorization status of the selected TACACS+ session. The possible values
are:
l AUTHEN_STATUS_PASS
l AUTHEN_STATUS_FAIL
l AUTHEN_STATUS_GETDATA
l AUTHEN_STATUS_GETUSER
l AUTHEN_STATUS_GETPASS
l AUTHEN_STATUS_RESTART
l AUTHEN_STATUS_ERROR
l AUTHEN_STATUS_FOLLOW
Request Type Indicates the type of authentication request. There are three supported request types:
l TACACS Authentication
l TACACS Authorization
l TACACS Accounting
Message This is a message to be displayed to the user.
Client IP This is the IPaddress of the device (for example, the ArubaOS switch)the remote IP device
is attempting to log into.
Remote IP This is the source IP address of the user device (for example, a laptop) attempting to log
into the client device.
Table 49: TACACS Session Details > Request Page Parameters
TACACS+ > Policies Tab
The TACACS+ > Policies page provides the details regarding the Policy Manager role mapping policies used,
authentication sources, and enforcement policies used (if available).
Figure 86: Access Tracker > TACACS Session Details > Policies Page