Users Guide

130 | Monitoring Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
This section provides the following information:
l Modifying the Accounting Page Parameters
l RADIUS Accounting Details> Summary Tab
l RADIUS Accounting Record Details > Auth Sessions Tab
l RADIUS Accounting Record Details > Utilization Tab
l RADIUS Accounting Record Details > Details Tab
l TACACS+ Accounting Record Details > Request Tab
l TACACS+ Accounting Record Details > Auth Sessions Tab
l TACACS+ Accounting Record Details > Details Tab
The Monitoring > Live Monitoring > Accounting page provides a dynamic report that describes session
access, as reported by the network access device by means of RADIUS or TACACS+ accounting records.
The following figure displays the Live Monitoring > Accounting page:
Figure 88: Live Monitoring > Accounting Page
The following table describes the Accounting parameters:
Parameter Description
Server
Specifies the IP address of the host name.
Protocol
Specifies the protocol used.
User
Displays the user name.
Access Device
Displays the IP address of the device.
Start Time
Displays the date and time.
Table 52: Accounting Page Parameters
You can click any row in the Accounting page to drill down and display the corresponding Accounting
Record Details page for the selected session. For details, see RADIUS Accounting Details> Summary
Tab on page 131 and TACACS+ Accounting Record Details > Auth Sessions Tab on page 138.
Modifying the Accounting Page Parameters
You can filter or modify the information displayed in this table by creating a filter, or selecting a different
server, domain, or time range.
To filter the data currently displayed in the Accounting page:
1. Navigate to the Monitoring > Live Monitoring > Accounting page.
2. Click Edit.