Users Guide

For network device discovery, specify SNMP Read credentials. An SNMP-based scan sends an SNMP request to
retrieve the network device information.
To add the SNMP configuration:
1. Navigate to Configuration > Profile Settings, then select the SNMP Configuration tab.
The Profile Settings > SNMP Configuration page opens.
2. Click the SNMP Configuration tab.
Figure 110: Adding an SNMP Configuration
3. Click Add SNMP Configuration.
The SNMP Configuration dialog opens.
Figure 111: SNMP Configuration Dialog
4. Specify the SNMP Configuration parameters as described in Table 66. When finished, click Save Entry,
then click Save.
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Monitoring | 155