Users Guide

162 | Monitoring Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Figure 122: Seed Device Successfully Scanned
5. You can stop a scheduled seed device scan or restart a completed scan:
a. To stop the scan operation, click the Red Action button, then click Yes to confirm the stop operation.
b. To restart a completed scan, click the Green Action button.
About Auto-Refresh
When Auto-Refresh is enabled (it is enabled by default), W-ClearPass fetches fresh data every few seconds to
ensure that the network discovery scan status is always current.
When Auto-Refresh is enabled, the button is green. You can disable Auto-Refresh by clicking the button,
which will then turn red to indicate this feature is disabled.
To enable or disable AutoRefresh:
1. Navigate to Monitoring > Profiler and Discovery > Network Discovery.
Figure 123: Network Discovery > Auto Refresh
2. Click the Auto Refresh link.
Every Auto-Refresh operation accesses the database and reads the data. When there is no network scan
occurring, you can disable Auto-Refresh as there is no need to access the database every time.
Importing and Viewing Discovered Network Devices
To import and view discovered network devices:
1. Navigate to Monitoring > Profiler and Discovery > Discovered Devices.
The Discovered Devices page opens.