Users Guide

184 | Authentication Methods and Sources Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Figure 146: Add Authentication Method Page
3. Enter the name and description of the new authentication method.
4. From the Type drop-down, select the type of authentication type.
You can select from the following list of Authentication types:
n Authorize
n CHAP (Challenge Handshake Authentication Protocol)
n EAP-FAST (Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling)
n EAP-GTC (EAP-Generic Token Card)
n EAP-MD5 (EAP-Message Digest 5)
n EAP-MSCHAPv2 (EAP-Microsoft Challenge Handshake Authentication Protocol version 2)
n EAP-PEAP (EAP-Protected Extensible Authentication Protocol)
n EAP-PEAP-Public
n EAP-PWD (EAP-Password)
n EAP-TLS (EAP-Transport Layer Security)
n EAP-TTLS (EAP-Tunneled Transport Layer Security)
n MAC-AUTH (MAC Address Authentication)
n MSCHAP (Microsoft Challenge Handshake Authentication Protocol version 1)
n PAP (Password Authentication Protocol)
5. Configure the Authentication Method of interest as described in the following sections:
n Authorize Authentication Method on page 185
n CHAP Authentication Method on page 186
n EAP-FAST Authentication Method on page 187
n EAP-GTC Authentication Method on page 192
n EAP-MSCHAPv2 on page 193
n EAP-PEAP on page 194
n EAP-PEAP-Public on page 196