Users Guide

246 | Authentication Methods and Sources Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
General Tab
The General tab labels the authentication source and defines session details, authorization sources, and
backup server details. The following figure displays the Token Server - General tab:
Figure 204: Token Server - General Tab
The following table describes the Token Server - General parameters:
Parameter Description
Name Specify the label of the authentication source.
Description Provide the additional information that helps to identify the authentication source.
Type Select the type of authentication. In this context, select Token Server.
Use for
Authorization
Enable this check box to instruct Policy Manager to fetch role mapping attributes (or authorization
attributes) from this authentication source. If a user or device successfully authenticates against
this authentication source, then Policy Manager also fetches role mapping attributes from the
same source if the Use for Authorization field is enabled. This check box is enabled by default
Authorization
Sources
Specify additional sources from which to fetch role mapping attributes. Select a previously
configured authentication source from the drop-down list, and click Add to add it to the list of
authorization sources. Click Remove to remove it from the list.
If Policy Manager authenticates the user or device from this authentication source, then it also
fetches role mapping attributes from these additional authorization sources.
Table 121: Token Server - General Tab Parameters