Users Guide

258 | Configuring Identity Settings Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
2. Click the Account Settings link.
The Account Settings page opens.
3. Select the Disable Accounts tab.
The Disable Accounts dialog opens.
Figure 214: Disable Accounts Dialog
4. Specify the Disable Accounts parameters as described in Table 128, then click Save.
Parameter Action/Description
Days Exceed 1. Specify the number of days before the account is disabled.
The range is from 1 to 100 days.
Date Exceeds 2. Specify the date when local users are disabled when the current date exceeds
the configured date.
The configured date can either be the current system date or a future date.
Entering a date prior to the current date is not supported.
Password not changed for 3. Specify the number of days allowed before the password must be changed
The range is from 1 to 365 days.
Failed attempts count 4. Specify the number of failed log-in attempts are allowed before the account is
disabled.
The range is from 1 to 100 attempts.
Reset failed attempts count 5. To reset the failed attempts count to zero and reenable those local users who
were disabled after exceeding the failed attempts count, click Reset.
Table 128: Disable Accounts Parameters