Users Guide

292 | Posture Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
To define Windows Service Groups, specify the evaluation rules, and add or remove specific Windows services
on the endpoint:
1. Navigate to Configuration > Posture > Posture Policies, then click Add.
2. From the Add Posture Policies page, select the Posture Plugins tab.
3. Select the W-ClearPass Windows Universal System Health Validator, then click Configure.
4. Select the Windows operating system, then check the Enable checks for Windows_OS.
5. Select Services.
The Services health class configuration page opens:
Figure 247 displays an example of the W-ClearPass Widows Universal System Health Validator >
Services configuration page and highlights examples of the evaluation rule for groups and the evaluation
rule for services:
Figure 247: Specifying Service Groups to Run
6. Specify the W-ClearPass Widows Universal System Health Validator > Services configuration
parameters as described in the following table:
Parameter Action/Description
Auto Remediation Enable to allow auto-remediation for service checks. Enabling this option automatically
stops or starts services based on the entries in Service to Run and Services to Stop
configuration.
Auto-remediation for the Services health class is enabled by default.
User Notification When enabled, a remediation message that includes the groups of services to be
present or absent is displayed to the end user.
Table 145: Services Configuration Parameters