Users Guide

Defining the Service Group to Be Present
You can configure the name of the service group and specify the evaluation rule for the service group.
1. To configure the Service Groups for Services to Run, click Add.
The Add Service Group to Be Present dialog opens.
Figure 248: Specifying the Service Group Evaluation Rule
2. Specify the Add Service Group to Be Present parameters as described in the following table:
Parameter Action/Description
Enter the Service Group
Name
1. Enter the name of the Service Group.
Service Group Evaluation
Rule
2. Select the appropriate Service Group Evaluation Rule:
l Pass All: Select this evaluation rule if you want the Services health class to be
deemed as healthy only if all the configured service groups are present.
Pass All is the equivalent of an AND condition.
l Pass Any One: Select this evaluation rule if you want the Services Check health
class to be deemed as healthy even if any one of the configured service groups are
present.
Pass Any One is the equivalent of an OR condition.
Table 146: Add Service Group to Be Present Parameters
Specifying the Services to Be Present
To specify the services to be present:
1. Click the Services to Be Present > Add button.
The Add Services to Run dialog opens.
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Posture | 293