Users Guide

Parameter Action/Description
Enter the Service Group
Name
1. Enter the name of the Service Group.
Service Group Evaluation
Rule
2. Select the appropriate Service Group Evaluation Rule:
l Pass All: Select this evaluation rule if you want all service groups to be stopped.
Pass All is the equivalent of an AND condition.
l Pass Any One: Select this evaluation rule if you want any one of the service groups
to be stopped.
Pass Any One is the equivalent of an OR condition.
Table 147: Add Service Group to Be Absent Parameters
3. Click Add.
The Add Services to Stop dialog opens.
Figure 251: Specifying the Services to Stop
4. Select one or more of the desired services from the Available Services list.
5. To move the desired services to the Services to Stop box, select the desired services, then click >>.
a. To remove services from the Services to Stop box, select the services to be removed, then click <<.
6. When finished configuring the services to stop, click Save.
Figure 252 shows an example of services configured for Windows Server 2003.
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Posture | 295