Users Guide

6. Specify the Processes configuration parameters as described in the following table:
Parameter Action/Description
Auto Remediation 1. Enable to allow auto-remediation for processes.
User Notification 2. Enable to allow user notifications in the event of process policy violations.
Table 148: Processes Page Parameters
Processes to be Present Parameters
1. In the Processes to be Present section, click Add.
The Add Processes to be Present page opens.
Figure 254: Add Processes to be Present Page
2. Specify the Processes to be Present parameters as described in the following table, then click Save:
Parameter Action/Description
Process Location 1. Choose from the following locations:
n System Drive
n Systemroot
n Program Files
n HOMEDRIVE
n HOMEPATH
n None
Enter the Process name 2. Specify the path name containing the process executable name.
Enter the Display name 3. Enter a user-friendly name for the process. This is displayed in end-user
facing messages.
Table 149: Processes to be Present Page Parameters
After you save the Processes parameters, the information appears in the Processes to be Present
section.
Processes to be Absent Parameters
1. In the Processes to be Absent section, click Add.
The Add Processes to be Absent page opens.
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Posture | 297