Users Guide

30 | About W-ClearPass Policy Manager Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Introduction
This section provides pointers to information on how to configure the primary configuration tasks in
W-ClearPass Policy Manager.
You can access all these configuration tasks via the W-ClearPass Configuration menu.
To access the W-ClearPass Configuration menu, select Configuration.
The W-ClearPass Configuration menu appears (see Figure 1):
Figure 1: W-ClearPass Policy Manager Configuration Menu
Start Here
The W-ClearPass Policy Manager Start Here page provides the ability to create templates for services that will
allows you to define baseline policies and require specific data when you create services.
For more information, see Start Here: About Policy Manager Service Templates on page 36.
Services
The Services page provides options to add, modify, and remove a service. For more information, refer to the
following sections:
l Services Architecture and Flow on page 35
l Start Here: About Policy Manager Service Templates on page 36
l Configuring Policy Manager Services on page 72
This page also shows the current list and order of services that W-ClearPass Policy Manager keeps track of
during authentication and authorization.