Users Guide

304 | Posture Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Action/Description
Data file has been updated in Enter the number, then specify the interval in hours, days, weeks, or
months.
Last scan has been done before Enter the number, then specify the interval in hours, days, weeks, or
months.
Real-time Protection Status
Check
l No Check: W-ClearPass does not use Real-time Protection
status value for health evaluation. This means that the client is
treated as healthy irrespective of the value of RTP.
l On: Marked as healthy only if the value of Real-time Protection
status is On.
Table 153: Antivirus Health Class Parameters (Continued)
After you save your Antivirus configuration, it is listed on the Antivirus page.
Figure 263: Antivirus Check Configured
AntiSpyware
In the AntiSpyware page, an administrator can specify that an AntiSpyware application must be on. This page
allows drill-down to specify information about the AntiSpyware application.
The AntiSpyware health class is not supported in the OnGuard Detection V4 SDK.
To define the Antivirus health class:
1. Navigate to Configuration > Posture > Posture Policies, then click Add.
2. From the Add Posture Policies page, select the Posture Plugins tab.
3. Select the W-ClearPass Windows Universal System Health Validator, then click Configure.
4. Select the Windows operating system, then check the Enable checks for Windows_OS.
5. Select Antivirus.
The Antivirus health class configuration page opens:
Figure 264: AntiSpyware Page (Overview Before)
6. To configure the AntiSpyware application information, click the An Antipyware Application is On check
box.