Users Guide

Figure 276: Windows Hotfixes Page
6. Specify the Windows Hotfixes parameters as described in the following table:
Parameter Action/Description
Auto Remediation Enable to allow auto-remediation for hotfix checks. Enabling this automatically
triggers updates of the specified hotfixes.
Auto-remediation for the Windows Hotfixes health class is enabled by default.
User Notification Enable to allow user notifications to check for hotfix policy violations.
Monitor Mode Click to enable Monitor Mode.
Windows Hotfixes Groups to be
Present Evaluation Rule
This evaluation rule specifies whether all groups should be healthy or any one
group should be healthy.
For example, if there are two Hotfixes Groups:
l Pass All: Select this evaluation rule to calculate the two group's health
status as Group1 AND Group2.
l Pass Any One: Select this evaluation rule to calculate the two group's
health status as Group1 OR Group2.
Table 158: Windows Hotfixes Page Parameters
Configuring Windows Hotfixes Groups to Be Present
To configure the Windows Hotfixes Groups to be present:
1. From the Windows Hotfixes health class configuration page (see Figure 276), click Add.
The following Hotfixes dialog opens:
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Posture | 313