Users Guide

Figure 339: Add Nessus Audit Server > Primary and Backup Server Tabs
3. Specify the Nessus Audit Server >Primary Server tab and Backup Server tab parameters as described
in Table 182.
Table 182: Nessus Audit Server > Primary and Backup Server Tabs Parameters
Parameter Action/Description
Backup On the Backup Server dialog: For the backup server to be invoked on
primary server failover, check the Enable to use backup when primary
does not respond check box.
Nessus Server Name Enter the name of the Nessus server.
Nessus Server Port Specify the Nessus Server port. The default is 1241.
Username Enter the username for the primary and backup Nessus servers.
Password Enter the password for the primary and backup Nessus servers.
Scan Profile You can accept the default scan profile or select Add/Edit Scan Profile to
create other profiles and add them to the scan profile list. Refer to Nessus
Scan Profiles on page 363.
In-Progress Timeout Specify the duration (in seconds) before polling for Nmap results. The
default is 30 seconds.
4. Configure the audit server Rules.
The Rules tab specifies rules for post-audit evaluation of the request to assign a role. For more information,
refer to Post-Audit Rules on page 368.
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Posture | 361