Users Guide

372 | Configuring Enforcement Policies and Profiles Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Figure 353: Add Enforcement Policy > Enforcement Tab
2. Specify the Add Enforcement Policy > Enforcement parameters as described in the following table:
Parameter Action/Description
Name Enter the name of this enforcement policy.
Description Enter a useful description of this enforcement policy (recommended).
Enforcement Type Select one of the following enforcement types:
l RADIUS
l TACACS+
l WebAuth (SNMP/CLI)/CoA
l Application
l Event
Based on this selection, the Default Profile drop-down lists the associated enforcement
profiles.
NOTE: Web-based Authentication or WebAuth (HTTPS) is the mechanism used by
authentications performed via a browser, and authentications performed via
W-ClearPass OnGuard.
Both SNMP- and CLI- (SSH/Telnet) based enforcement profiles can be sent to the network
device based on the type of device and the use case.
Default Profile An enforcement policy applies conditions (roles, health, and time attributes) against
specific values associated with those attributes to determine the enforcement profile. If
none of the rules matches, Policy Manager applies the default profile.
To add a new profile, click Add New Enforcement Profile.
Table 187: Add Enforcement Policy > Enforcement Tab Parameters
3. In the Rules tab, click New Rule to display the Rules Editor: