Users Guide

l RADIUS Enforcement
l RADIUS Proxy
l Dell Application Authentication
l Dell Application Authorization
l TACACS+ Enforcement
l Web-based Authentication
l Web-based Open Network Access
Viewing the List of Services
The Services page shows the current list and order of services that W-ClearPass Policy Manager follows during
authentication and authorization. You can use the configured default service types or you can add additional
services. Services included in square brackets "[ ]" indicate default services.
To view the list of services on the current W-ClearPass server:
Navigate to Configuration > Services.
The Services page opens:
Figure 7: Services Page
The following table describes the Services parameters:
Parameter Description
Name Displays the name of the service.
Type Displays the type of authentication associated with the service. For example, RADIUS, Web
Authentication, and TACACS.
Template Specifies the type of the service template to create a service.
Status Displays the status of the service. A green/red icon indicates enabled/disabled state. Click the icon
to toggle the status of a service between Enabled and Disabled.
NOTE: If a service is in Monitor mode, an [m] indicator is displayed next to the Status icon.
Table 3: Services Page Parameters
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Services | 39