Users Guide

396 | Configuring Enforcement Policies and Profiles Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Action/Description
Action To define the action to take on the request, click Accept, Reject, or Drop.
Device Group
List
Select a Device Group from the drop-down list. The list displays all configured device groups.
All configured device groups are listed in the Configuration > Network > Device Groups
page. After adding one or more device group(s), you can select a group and take one of the
following actions:
l To delete the selected Device Group List entry, click Remove.
l To see the device group parameters, click View Details.
l To change the parameters of the selected device group, click Modify.
Add New
Device Group
To add a new a device group, click the Add New Device Group link. For more information, see
Adding and Modifying Device Groups on page 474.
Table 199: Cisco Downloadable ACL Enforcement > Profile Parameters (Continued)
Attributes Configuration
Use the Attribute tab to configure the attribute type, name, and value for the enforcement profile.
The following figure displays the Cisco Downloadable ACL Enforcement > Attributes dialog:
Figure 382: Cisco Downloadable ACL Enforcement > Attributes Dialog
Specify the Cisco Downloadable ACL Enforcement > Attributes parameters as described in the following
table:
Parameter Action/Description
Type
Select one of the following attribute types:
n Radius:IETF
n Radius:Cisco
n Radius: Hewlett-Packared-Enterprise
n Radius: Alcatel-Lucent-Enterprise
n Radius:Microsoft
n Radius:Avenda
n Radius:Dell
For more information, see RADIUS Namespaces on page 928.
Name
The options displayed for the Name attribute depend on the Type attribute that was selected.
Value
The options displayed for the Value attribute depend on the Type and Name attributes that
were selected.
Table 200: Cisco Downloadable ACL Enforcement > Attributes Parameters