Users Guide

418 | Configuring Enforcement Policies and Profiles Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
n Post-Auth-Check > Action = Disconnect
4. Session Duration: The User/Endpoint is allowed access to the network daily for three hours in a specified
time period (between 9:00 a.m. and 5:00 p.m.)
n Session-Check > Allowed-Duration = 3
n Session-Check >Duration-Units = Hours
n Session-Check > Check-Type = Daily
n Session-Check > Start-Time = 09:00:00
n Session-Check Stop-Time = 17:00:00
n Post-Auth-Check > Action = Disconnect
SNMP-Based Enforcement Profile
Use this page to configure the SNMP-Based Enforcement profile.
Profile Configuration
The following figure displays the SNMP Based Enforcement > Profile dialog:
Figure 409: SNMP Based Enforcement > Profile Dialog
Specify the SNMP Based Enforcement > Profile parameters as described in the following table:
Parameter Description
Template Select the SNMP Based Enforcement template.
Name Enter the name of the profile.
The name is displayed in the Name column on the Configuration > Enforcement > Profiles
page.
Description Enter a description of the profile (recommended).
The description is displayed in the Description column on the Configuration > Enforcement >
Profiles page.
Type SNMP. The field is populated automatically.
Table 221: SNMP Based Enforcement > Profile Tab Parameters