Users Guide

Parameter Description
Action Disabled.
Device Group
List
Select a Device Group from the drop-down list.
All configured device groups are listed in the Configuration > Network > Device Groups
page. After you add one or more device group(s), you can select a group and take one of the
following actions:
l To delete the selected Device Group List entry, click Remove.
l To see the device group parameters, click View Details.
l To change the parameters of the selected device group, click Modify.
Add New
Device Group
To add a new a device group, click the Add New Device Group link. See Adding and Modifying
Device Groups on page 474.
Table 221: SNMP Based Enforcement > Profile Tab Parameters (Continued)
Attributes Configuration
The following figure displays the SNMP Based Enforcement > Attributes dialog:
Figure 410: SNMP Based Enforcement > Attributes Dialog
Specify the SNMP Based Enforcement > Attributes parameters as described in the following table:
Parameter Action/Description
Attribute Name
Select from:
l VLAN ID
l Session Timeout (in seconds)
l Reset Connection (after the settings are applied)
Attribute Value
The options displayed for the Attribute Value depends on the Attribute Name that was
selected.
Table 222: SNMP Based Enforcement Attributes Parameters
TACACS+ Based Enforcement Profile
Use this page to configure the TACACS+ Based Enforcement profile.
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Configuring Enforcement Policies and Profiles | 419