Users Guide

42 | Services Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Action/Description
Type Select the desired service type from the drop-down list.
When working with service rules, you can select from the following namespace dictionaries:
l Application: The type of application for this service.
l Authentication: The Authentication method to be used for this service.
l Connection: Originator address (Src-IP-Address, Src-Port), Destination address (Dest-IP-
Address, Dest-Port), and Protocol
l Device: Filter the service based on a specific device type, vendor, operating system location,
or controller ID.
l Date: Time-of-Day, Day-of-Week, or Date-of-Year
l Endpoint: Filter based on endpoint information such as enabled/disabled, device, OS,
location, and more.
l Host: Filter based on host Name, OSType, FQDN, UserAgent, CheckType, UniqueID, Agent-
Type, and InstalledSHAs,
l RADIUS: W-ClearPass ships with a number of vendor-specific namespace dictionaries and
distinguishes vendor-specific RADIUS namespaces with the notation RADIUS:vendor
(sometimes with an additional suffix for a particular device). To add a dictionary for a vendor-
specific RADIUS namespace, navigate to Administration > Dictionaries > Radius >
Import (link).
The notation RADIUS:IETF refers to the RADIUS attributes defined in RFC 2865 and
associated RFCs. As the name suggests, RADIUS namespace is only available if the request
type is RADIUS.
l Any other supported namespace: See Rules Editing and Namespaces on page 919 for an
exhaustive list of namespaces and their descriptions.
To create new services, you can copy or import other services for use as is or as templates, or
you can create a new service.
Name Enter the name or label for the service you want to create.
Description Enter a description that provides additional information to identify the service. This field is
optional.
Table 4: Add Services Page Parameters