Users Guide

420 | Configuring Enforcement Policies and Profiles Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Profile Configuration
The following figure displays the TACACS+ Based Enforcement > Profile tab:
Figure 411: TACACS+ Based Enforcement Profile Dialog
Specify the TACACS+ Based Enforcement Profile > Profile parameters as described in the following table:
Parameter Action/Description
Template Select the TACACS+ Based Enforcement template.
Name Enter the name of the profile.
The name is displayed in the Name column on the Configuration > Enforcement > Profiles
page.
Description Enter a description of the profile (recommended).
The description is displayed in the Description column on the Configuration > Enforcement
> Profiles page.
Type TACACS. The field is populated automatically.
Action Disabled.
Device Group
List
Select a Device Group from the drop-down list.
All configured device groups are listed in the Configuration > Network > Device Groups
page. After you add one or more device group(s), you can select a group and take one of the
following actions:
l To delete the selected Device Group List entry, click Remove.
l To see the device group parameters, click View Details.
l To change the parameters of the selected device group, click Modify.
Add New
Device Group
To add a new a device group, click the Add New Device Group link. See Adding and Modifying
Device Groups on page 474.
Table 223: TACACS+ Based Enforcement > Profile Parameters