Users Guide

Parameter Description
Action To define the action taken on the request, click Accept, Reject, or Drop.
Device Group
List
Select a Device Group from the drop-down list.
All configured device groups are listed in the Configuration > Network > Device Groups
page. After you add one or more device group(s), you can select a group and take one of the
following actions:
l To delete the selected Device Group List entry, click Remove.
l To see the device group parameters, click View Details.
l To change the parameters of the selected device group, click Modify.
Add New
Device Group
To add a new a device group, click the Add New Device Group link and see Adding and
Modifying Device Groups on page 474.
Table 225: VLAN Enforcement > Profile Parameters (Continued)
Attributes Configuration
The following figure displays the VLAN Enforcement > Attributes dialog:
Figure 414: VLAN Enforcement Attributes Dialog
Specify the RADIUS Based Enforcement > Attributes parameters as described in the following table:
Parameter Description
Type
Select one of the following attribute types:
n Radius:Aruba
n Radius:IETF
n Radius:Cisco
n Radius: Hewlett-Packared-Enterprise
n Radius: Alcatel-Lucent-Enterprise
n Radius:Microsoft
n Radius:Avenda
For more information, see RADIUS Namespaces on page 928
Name
The options displayed for the Name attribute depend on the Type attribute that was selected.
Value
The options displayed for the Value attribute depend on the Type and Name attributes that
were selected.
Table 226: VLAN Enforcement Attributes Tab Parameters
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Configuring Enforcement Policies and Profiles | 423