Users Guide

426 | Configuring Policy Simulation Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
This simulation tests authentication against an Active Directory domain or trusted domain to verify that the
W-ClearPass Policy Manager domain membership is valid.
The Attributes tab is not available for this simulation type.
Adding an Active Directory Simulation
To add the RADIUS authentication server for the authentication test:
1. Navigate to the Configuration > Policy Simulation > Add page.
The Add Policy Simulation dialog appears.
2. Enter the Name of the simulation.
3. From the Type drop-down list, select Active Directory Authentication.
The following figure displays the Active Directory Authentication Simulation dialog.
Figure 416: Active Directory Authentication - Simulation Tab
The following table describes the Active Directory Authentication - Simulation tab parameters:
Parameter Description
Active Directory Domain Select the domain(s) to which the node is joined.
Username Enter the username to login to the domain.
Password Enter the password to login to the domain.
Table 228: Active Directory Authentication Simulation Tab Parameters
Viewing the Simulation Results
The Results tab for the Active Directory Authentication simulation displays a summary of the
Authentication test and provides a status message.
The following figure displays the Active Directory Authentication - Results tab:
Figure 417: Active Directory Authentication Results Tab