Users Guide

Parameter Description
Summary Displays the results of the Active Directory Authentication simulation.
Status Displays the status message.
Table 229: Active Directory Authentication Results Tab Parameters
Application Authentication Simulation
This simulation tests authentication requests generated from W-ClearPass Guest. The following figure displays
the Application Authentication policy simulation settings available on the Configuration > Policy
Simulation > Add page:
Simulation Tab
Figure 418: Application Authentication - Simulation Tab
Parameter Description
CPPM IP Address/FQDN Enter the IP Address or FQDN of the domain(s) to which the node is joined.
Username Enter the username.
Password Enter the password.
Table 230: Application Authentication Simulation Tab Parameters
Attributes Tab
Enter the attributes of the policy component to be tested. The following figure displays the Application
Authentication - Attributes tab:
Figure 419: Application Authentication - Attributes Tab
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Configuring Policy Simulation | 427