Users Guide

436 | Configuring Policy Simulation Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Description
Deny Access
Displays the output of the Deny Access test.
Enforcement Profile Displays the name of the Enforcement Profile.
Table 240: Enforcement Policy Results Tab Parameters
RADIUS Authentication Simulation
This section provides the following information:
l Adding a RADIUS Authentication Simulation
l Setting the Attributes to Be Tested
l Viewing the Simulation Results
Dictionaries in the RADIUS namespace come prepackaged with the W-ClearPass Policy Manager. The
administration interface does provide a way to add dictionaries into the system (see RADIUS Dictionary on
page 685 for more information).
The RADIUS namespace uses the notation RADIUS:Vendor, where Vendor is the name of the company that has
defined attributes in the dictionary. The same vendor can have multiple dictionaries, in which case the "Vendor"
portion includes a suffix or some other unique string by the name of the device to differentiate the
dictionaries.
Adding a RADIUS Authentication Simulation
To add the RADIUS authentication server for the authentication test:
1. Navigate to the Configuration > Policy Simulation > Add page.
The Add Policy Simulation dialog opens.
2. Enter the Name of the simulation.
3. From the Type drop-down list, select RADIUS Authentication.
Figure 429 displays the RADIUS Authentication Simulation Details dialog, with the Server parameter
set to Remote.