Users Guide

460 | W-ClearPass Policy Manager Profile Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
To configure SNMP for wired network profiling:
1. Navigate to Configuration > Profile Settings.
2. Click the SNMP Configuration tab.
Figure 457: Profile Settings > SNMP Configuration Page
3. Click Add SNMP Configuration.
The SNMP Configuration dialog opens.
Figure 458: Configuring SNMP Community Strings
4. Specify the SNMP Configuration parameters as described in the following table, click Save Entry, then
click Save:
Parameter Action/Description
IP Subnets/
IPAddresses
Enter one or more IP subnet addresses and their subnet masks. For multiple entries,
separate multiple IP addresses with commas.
SNMP Version
From the drop-down, select the appropriate SNMP version.
Description Optionally, enter a description of this SNMP configuration (recommended).
Community String Enter the community string, then reenter the communty string in the Verify field.
Table 259: SNMP Configuration Parameters