Users Guide

Parameter Action/Description
Allow SNMP
Read
Toggle to enable or disable SNMP Read operations.
Policy
Manager
Zone
You can assign Network Access Devices to a zone, allowing the SNMP service to poll or query
only the NADs that are in its zone.
l From the Policy Manager Zone drop-down, select the zone assigned to the network device
that is being added.
OnConnect Enforcement is triggered when a trap from a NAD is received by a W-ClearPass node.
If the zone assigned to a W-ClearPass node is not same as the zone configured here, then
OnConnect Enforcement is not triggered on that W-ClearPass node.
NOTE: This setting can be empty or null.
SNMP Read
Setting
Specify one of the following SNMP Read Settings:
n SNMP v1 with community strings
n SNMP v2 with community strings
n SNMP v3 with no Authentication
n SNMP v3 with Authentication using MD5 and no Privacy
n SNMP v3 with Authentication using MD5 and with Privacy
n SNMP v3 with Authentication using SHA and no Privacy
n SNMP v3 with Authentication using SHA and with Privacy
NOTE: The MD5 authentication type is not supported when you use W-ClearPass Policy Manager
in FIPS mode.
Community
String
Enter the community string for sending the traps.
NOTE: Available in SNMP v2 only.
Verify
Reenter the community string for sending the traps.
Force Read Enable Force Read to ensure that all W-ClearPass Policy Manager nodes in the cluster read
SNMP information from this device regardless of the trap configuration on the device.
This option is useful when demonstrating a static IP-based device profiling because this does not
require any trap configuration on the network device.
NOTE: Available in SNMP v1 and SNMP v2 only.
Read ARP
Table Info
Enable this setting on a Layer-3 device if you intend to use the ARP table on this device to
discover endpoints in the network.
static IP endpoints that are discovered this way are probed using SNMP to profile the device.
Username Specify the Admin user name to use for SNMP read operations.
NOTE: Available in SNMP v3 only.
Table 261: Add Device > SNMP Read Settings Parameters
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Network Access Devices | 467