Users Guide

Figure 17: Service Templates > 802.1X Wired Service Template

Adding a New Service for the Selected Service Template

To add a new service for the selected service template:

1. Specify a unique Name Prefix (applies only to the selected template) in the General tab.

2. Update the required fields in the Authentication and Enforcement Details sections.

3. Click Add Service.

An entry for the new set of configuration is created under the Services, Roles, Role Mapping,

Enforcement Policies and Profiles menus.

The sections shown in the figure and listed above are not same for all service templates. It is recommended to

customize the respective templates when you add a new service.

Once you add a new service to the service template, the service denoted by the Name Prefix appears in

the Select Prefix drop-down. Selecting a prefix from the drop-down populates the existing configuration

for the service.

4. Specify the parameters in the 802.1X Wired, 802.1X Wireless, and Dell W-Series 802.1X Wireless service

templates as described in the following table:

Parameter Action/Description

General

Select Prefix 1. Select a prefix from the existing list of prefixes.

This populates the preconfigured information in the Authentication and Enforcement

Details sections. The Name Prefix field is not editable.

Name Prefix 2. Enter a prefix that is appended to services using this template.

Use this to identify the services that use templates.

Authentication

Select

Authentication

Source

1. Select any available authentication source from the list.

The information updated in the Authentication and Enforcement Details tabs will be auto-

populated.

Active