Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsW-ClearPass Virtual Appliances
461462463464465466467468469470
470 | Network Access Devices Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Action/Description
Allow CLI Access Toggle to enable or disable CLI access.
Access Type Select SSH or Telnet.
Policy Manager uses the selected access method to log into the device CLI.
Port Specify the SSH or Telnet TCP port number.
Username Enter the username to log into the CLI.
Password Enter the password to log into the CLI.
Username Prompt Regex Specify the regular expression for the username prompt.
Policy Manager looks for this pattern to recognize the Telnet username prompt.
Password Prompt Regex Specify the regular expression for the password prompt.
Policy Manager looks for this pattern to recognize the Telnet password prompt.
Command Prompt Regex Specify the regular expression for the command line prompt.
Policy Manager looks for this pattern to recognize the Telnet command-line prompt.
Enable Prompt Regex Specify the regular expression for the command line in the enable prompt.
Policy Manager looks for this pattern to recognize the Telnet command-line prompt.
Enable Password Enter then reenter the credentials for the Enable password in the CLI.
Table 263: AddDevice > CLI Parameters
Enabling W-ClearPass OnConnect Enforcement on a Network Device
OnConnect Enforcement is an enforcement model that allows you to use non-802.1X methods for device
scans, VLAN placement, and so on. OnConnect Enforcement allows enforcement in non-802.1X environments
without the need for an agent (such as OnGuard) on the endpoint.
When this feature is enabled, W-ClearPass performs the following actions:
l Detects when a new endpoint connects to the network.
l Scans the endpoint to identify the logged-in user and other device-specific information.
l Triggers a Web-based authentication (WebAuth) for the device.
l Performs SNMP-based enforcement to change the network access profile for the device.
To enable W-ClearPass OnConnect Enforcement on a network device:
1. From the Add Device page, select the OnConnect Enforcement tab.
The OnConnect Enforcement dialog opens: