Users Guide

476 | Network Access Devices Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
The following table describes the Add New Device Group page parameters:
Parameter Description
Name Enter the name of the device group.
Description Enter the description that provides additional information about the device group.
Format Select the format: Subnet, Regular Expression, or List.
Subnet Enter a subnet consisting of network address and the network suffix (CIDR notation). For
example, 192.168.5.0/24.
Regular
Expression
Specify a regular expression that represents all IPv4 addresses matching that expression.
For example, ^192(.[0-9]*){3}$.
List:
Available/Selected
Devices
Use the widgets to move device identifiers between Available and Selected. Click Filter to
filter the list based on the text in the associated text box.
Table 266: Add New Device Group Page
Configuring the Ingress Event Sources
The Event Source is the device that sends Syslog events to W-ClearPass. Any events sent that are not from
configured event sources are ignored.
To configure the Event Source (in this example, a Juniper Networks SRX gateway):
1. Navigate to Configuration > Network > Event Sources.
The Event Sources page opens.
2. To add the Event Source for the desired vendor, click Add.
The Add Events Source dialog opens.
Figure 471: Adding an Event Source
3. Specify the Add Event Source parameters as described in Table 267.