Users Guide

48 | Services Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Action/Description
Server 4. Enter the hostname or the IP address of the Active Directory server.
This field is mandatory.
Port 5. Enter the TCP port where the server is listening for a connection.
This field is mandatory.
Identity 6. Enter the Distinguished Name (DN) of the administrator account.
This field is mandatory.
Password 7. Enter the account password.
This field is mandatory.
NetBIOS 8. Enter the server Active Directory domain name.
This field is mandatory.
Base DN 9. Enter the DN of the node in your directory tree from which to start searching for records.
This field is mandatory.
Enforcement Details
Attribute
Name
The attributes defined in the Authentication Source are listed here.
1. Configure an optional enforcement policy based on the following attributes:
n Email
n Name
n Phone
n UserDN
n Company
n member of
n Title
For example, you can configure an enforcement policy for a contractor specifying that "If Name
equals <contractor_name>, then assign the [Contractor] Role."
Attribute
Value
2. Enter the active directory attribute value for the selected name in the Attribute Name field.
VLAN ID 3. Enter the standard RADIUS-IETF VLANID.
Wired Network Settings
Select Switch 1. Select any switch from the drop-down list.
Device Name 2. Enter the name of the device.
IP Address 3. Enter the IP address of the device.
Vendor Name 4. Select the manufacturer of the wired controller.
RADIUS
Shared Secret
5. Enter the shared secret that is configured on the controller and inside Policy Manager to send
and receive RADIUS requests.
Table 5: 802.1X Wired, 802.1X Wireless, and Dell W-Series 802.1X Wireless Service Template Parameters
(Continued)