Users Guide
500 | Administration Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Action/Description
Enable Performance
Monitoring
5. To enable the W-ClearPass Policy Manager server to perform performance
monitoring, select the Enable Performance Monitoring check box.
Insight Setting 6. To enable the Insight reporting tool on this node, select the Enable Insight check
box.
NOTE:
l When you enable this check box for Insight on a node in a cluster, the [Insight
Repository] configuration is updated automatically to point to the management IP
address of that server.
l When this check box is enabled for other servers in the cluster, they are added as
backups for the same authentication source.
l The order of the primary and backup servers in the [Insight Repository] is the same
order in which the user enables Insight on the server.
Enable as Insight
Master
7. To specify the current server in the cluster as an Insight Master, select this check
box.
NOTE: This option is available only when Insight Setting > Enable Insight is enabled.
OnConnect Setting 8. To enable the OnConnect Enforcement on this node, select the Enable OnConnect
check box.
When you enable OnConnect, a drop-down box appears that allows you to specify
whether the selected server is the Primary or Secondary master for agentless
OnConnect Enforcement in its zone.
NOTE: When you enable the Enable OnConnect check box, you must specify the current
W-ClearPass server as a Primary or Secondary Master for OnConnect Enforcement.
9. From the drop-down list, select Primary master or Secondary master.
The first server that is enabled for OnConnect Enforcement in a zone is automatically
designated as the Primary master for that zone. After other servers in the zone are
enabled for OnConnect Enforcement, if the Primary master fails, the designated
Secondary master takes over until the Primary master is back on-line.
For information on creating an OnConnect Enforcement service, see W-ClearPass
OnConnect Enforcement Service on page 100.
NOTE: In order for OnConnect Enforcement to be fully functional, OnConnect must be
enabled both the W-ClearPass server and on any network devices that you wish to use
for OnConnnect Enforcement (see Enabling W-ClearPass OnConnect Enforcement on a
Network Device on page 470).
NOTE: During OnConnect, the domain name and machine name are fetched, along with
the logged-in user name. The domain name can be used as an attribute for enforcement
policies.
Enable Ingress Events
Processing
10. Check this check box to enable ingress events processing on this server.
For more information, see Configuring Processing for Ingress Events.
Enable as Insight
Master
11. To specify the current server in a cluster as an Insight Master, select this check box.
NOTE: This option is available only when Insight Setting > Enable Insight is enabled.
Span Port 12. If necessary, select a port for DHCPspanning.
On selecting a port, the Enable TCP/ARP Fingerprinting check box appears.
Table 274: Server Configuration > System Page Parameters (Continued)